Home1.gif (1265 bytes)
vert2.gif (199 bytes)vert3.gif (518 bytes)vert4.gif (898 bytes)vert5.gif (880 bytes)
vert6.gif (904 bytes)
vert7.gif (1769 bytes)ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)
ext.gif (66 bytes)

 

Motion_Control.gif (2220 bytes)

Since 1977!

Highest Performance!

Best Quality

+ Engineering
  Support!

 

Our engineering expertise is available
to provide
technical support
for the products
we sell; and assist
our customers
in solving
their engineering
problems.


 

 

 

 

 

 

 

 

 

 

 






  


SELlogo.gif (5349 bytes)


 
Ultract II
S
pecifications of Stadard Models 


Ultract TW
Type Brushless PM AC servomotors, low inertia, high angular stiffness.
Rotor Syntered, high temperature rare earth, mechanically fastened magnets (without bonding).
Insulation Motor: Class F according to DIN 0530 Winding: Class H according to DIN 0530, special high frequency winding suitable for long wiring with high frequency pwm waveform.
Thermal protection PTC + KTY 84 linear probe.
Bearings Heavy duty, life lubricated; Sizes 10 and 13: front bearing locked in high strenght cast iron seat.
Balancing Grade R (reduced tolerance).
Concentricity and squareness of mounting flange Grade R (reduced tolerance) according to IEC 72-DIN 0530.
Shaft Cylindrical without keyway, tolerance j6, for interference mounting with shrink rings; axial threaded hole.
Cooling Natural convection IC0041; sizes 10 and 13, designed for process lines and sustained operation at high speed, option F, forced cooling over frame with fan servo controlled by the motor.
Working position Any.
Mounting Flanged B5.
Stray capacitance to ground Minimized EMC impact.
Protection IP 65.
Position sensor Sine cosine Encoder 2048 cycles/rev + 1 cycle/rev + index, operating temperature up to 120C, allowing absolute interpolation to 8M points/rev.

Back to Ultract II Overview>>

Go with the industry's best -- for further information and/or engineering assistance call us at (708) 449-5700 (ext. 1), fax us (708) 449-5703, or e-mail us today!

Schlenker Enterprises, Ltd.
P.O. Box 9277
Lombard, IL  60148-9277, USA
708-449-5700 (Phone)
708-449-5703 (Fax)


E-Mail: sales@schlenkent.com

 

[Rack_and_Pinion_Measuring]    [Precision_Rules]    [DROs]  [Instrument_Gears]   [Clutches,_Brakes]     [Torque_Transducers]    [Products]    [Contact_Us-Send_Brochure]     [Home]

 

Best viewed in Microsoft Internet Explorer or Netscape Communicator.
Best viewed in a 600 X 800 monitor.

Copyright 1998 Schlenker Enterprises Ltd.